manualshive.com logo in svg

Tektronix TDS 410A, Programming Manual

Share
Download
Tektronix TDS 410A Programming Manual Download Page 127

Command Descriptions

TDS Family Oscilloscope Programmer Manual

2–109

BACKGround

SCROLLBAR

GRAticule

COLLision

DISplay

:

COLOr

PALEtte

:

:

TEXt

REF

MATH

CH3

ZONe

CH1

CH2

CH4

SCROLLTEXT

BOLd

MONo

NORMal

HARDCopy

:

<Space>

<NR1>

<NR1>

?

<NR1>

,

,

BACKGround

 specifies the display background color.

CH1

 specifies the channel 1 waveform and associated text color.

CH2

 specifies the channel 2 waveform and associated text color.

CH3

 specifies the channel 3 waveform and associated text color.

CH4

 specifies the channel 4 waveform and associated text color.

MATH

 specifies the default math waveforms and associated text color.

REF

 specifies the default reference waveforms and associated text color.

TEXt

 specifies the text color in all menus and all readouts not associated with a

waveform.

SCROLLTEXT

 specifies text in the scroll bar. For example, this covers the scroll

bars used in the file system.

ZONe

 specifies the color of the intensified zone on the waveform when the time

base is intensified and the color of the real samples when the display style is
Intensified Samples.

COLLision

 specifies the color of the areas where waveforms overlap each other.

You can turn collision marking on or off with the Items, Waveforms, Options,
Collision Contrast menu item.

GRAticule

 specifies the color of the graticule. Use the Settings, Display,

Graticule option to select the graticule type.

Arguments

Summary of Contents for TDS 410A































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands