Tektronix LTA7P Series, Service Manual

Page: 61 / 172

Performance Verification: Logic Analyzer Module
TLA7Nx, TLA7Px, & TLA7Qx Logic Analyzer Module Service Manual
4- 13
The software consists of executable software files. Use the following steps to
start and run the software:
1. Allow the instruments to warm up for at least 30 minutes before beginning
the procedure.
2. Quit all applications including the TLA application.
3. Select Start
→
Programs
→
TLA Performance Verification.
4. To run the performance verification and adjustment software, select the
following:
H
For the LA modules, select LA 7XX PV.
5.
Follow the instructions on the screen to enter the name you want to appear in
the User Name field as shown below. This name will appear on the
Calibration Data Reports.
6. The program lists several different modules, referred to as DUT (Device
Under Test). Enter the number corresponding to the module type that you
want to test; then click Enter to continue.
The screen will display an error message if the DUT chosen does not match
the installed DUT.
7. Click Enter to continue.
8. Enter the complete serial number of the DUT (for example, B010100). Click
Enter to continue.
If you select no, a prompt asks you to enter the serial number again.
Using the Software