Tektronix LTA7P Series, Service Manual

Page: 35 / 172

Operating Information
TLA7Nx, TLA7Px, & TLA7Qx Logic Analyzer Module Service Manual
2- 3
NOTE
. This installation program uses parameters you supply to create a custom
start-up file in your hard disk directory.
The batch file enables the software to configure your instrument properly before
it runs the program.
1.
Power on the instrument.
2.
Exit the Application.
If your logic analyzer already has PV/Adjust software loaded on it, you must
verify that the version is the same as the version printed on Disc 1 of the
Tektronix Logic Analyzer Family Application Software CD.
If the version of the PV/Adjust software loaded on your logic analyzer is an
earlier version, you must delete the earlier version before you can load the newer
version.
If your logic analyzer already has a directory named Tekcats or Temptek on the
hard drive, the software installation cannot be completed. Follow these instruc-
tions to verify the directory is not present:
1.
Select Start
→
Search
→
For Files or Folders.
2.
In the “Search for files or folders:” box, type “Tekcats” or “TempTek” and
then click the Search Now button fo search for either directory.
3.
If either directory is found follow the instructions under
Removing the
Software to remove the software and the directories.
Follow these instructions to install the PV/Adjust software.
1.
Close all open windows on the desktop.
2.
Insert Disk 1 of the Tektronix Logic Analyzer Family Application Software
CD in the CD-ROM drive.
3.
Click the My Computer Icon and double-click the CD-ROM drive.
4.
Double-click the TLA Performance Verification folder.
5.
Double-click on the Logic Analyzer PV folder and then double-click the
Disk1 folder.
6.
Double-click the Setup.exe icon to begin the installation program.
7.
Follow the on-screen instructions to install the software on the hard disk.
Verify PV/Adjust Software
Version
Verify Directories
Install the PV/Adjust
Software