Tektronix LTA7P Series, Service Manual

Page: 33 / 172

TLA7Nx, TLA7Px, & TLA7Qx Logic Analyzer Module Service Manual
2- 1
Operating Information
This chapter provides brief operating information for performing maintenance.
The operating information is limited to the functions you need to perform the
procedures found in this document. You can find more detailed operating
instructions in the
Tektronix Logic Analyzer Family User Manual and in the
online help.
Installation
This section contains brief installation information and is provided for your
convenience. For detailed installation information, refer to the
Tektronix Logic
Analyzer Family User Manual
.
NOTE
. Do not set the logic analyzer module logical address to 00. Logical
address 00 is reserved for the controller.
Dynamic Autoconfiguration
With Dynamic Auto Configuration (Recommended)
selected (hexadecimal FF or decimal 255), the logic analyzer automatically sets
the address to an unused value. For example, if there are modules set to
addresses 01 and 02 already in your system, the resource manager will automati-
cally assign the logic analyzer module an address other than 01 or 02.
Static Logical Address Static logical address selections set the address to a fixed
value. A static logical address ensures that the logic analyzer module address
remains fixed for compatibility with modules that require a specific address
value. Remember that each module within the logic analyzer must have a unique
address to avoid communication problems.