Tektronix KEITHLEY 2200 Series, Programming Reference Manual

Page: 53 / 104

Commands Listed in Alphabetical Order
Returns
<mask>
Examples
STATUS:OPERATION:INSTRUMENT[:ENABLE]?
might return
128
, which would
indicate that only the Constant Current bit of the Operation Enable Register would
affect the OPER bit of the Status Byte Register.
STATus:OPERation:INSTrument[:EVENt]? (Query Only)
This command returns the contents of the operation event register. After executing
this command the operation event register is reset. Details about status registers
are available in this manual. (See page 3-1,
Status and Events .)
Group Status
Syntax
STATus:OPERation:INSTrument[:EVENt]?
Related Commands STATus:OPERation:INSTrument[:ENABle]?
Returns
<NR1>
is a decimal integer representation of the contents of the Operation Event
Register (OEVR), ranging from 0 to 255.
Examples
STATUS:OPERATION:INSTrument[:EVENT]?
might return
10
, which indicates
that the power supply is waiting for trigger and is in a constant current mode.
STATus:OPERation:INSTrument:ISUMmary<x>:CONDition? (Query Only)
This command is used to query the operation condition register of a channel,
where <x> is 1, 2, or 3. 1, 2, and 3 are channel 1, 2, and 3, respectively. Only 1
and 2 are available on two channel instruments.
Group Status
Syntax
STATus:OPERation:INSTrument:ISUMmary<x>:CONDition?
Related Commands STATus:OPERation:INSTrument:ISUmmary<x>[:EVENt]? , STATus:OPERation:
INSTrument:ISUmmary<x>:ENABle
Series 2200 Programmable Multichannel DC Power Supplies Programmer Manual 2-39