Tektronix KEITHLEY 2200 Series, Programming Reference Manual

Page: 46 / 104

Commands Listed in Alphabetical Order
Group Source
Syntax
[SOURce:]OUTPut:TIMer[:STATe] {0|1|ON|OFF}
[SOURce:]OUTPut:TIMer[:STATe]?
Related Commands [SOURce:]OUTPut:TIMer:DELay , [SOURce:]OUTPut[:STATe][:ALL] ,
INSTrument:SELect
Arguments
0
or
OFF
turns the output timer off.
1
or
ON
turns the output timer on.
Returns
0|1
Examples
To activate the timer, fi rst send
OUTPUT:TIMER:STATE ON
, then send
OUTPUT:STATE ON
.
To turn the timer off, send
OUTPUT:TIMER:STATE OFF
.
[SOURce:]VOLTage[:LEVel]:DOWN[:IMMediate][:AMPLitude] (No Query Form)
This command is used to decrease the voltage level of the currently selected
channel by a step. The voltage step value can be set by the following command:
[SOURce:]VOLTage[:LEVel][:IMMediate]:STEP[:INCRement]
Group
Source
Syntax
[SOURce:]VOLTage[:LEVel]:DOWN[:IMMediate][:AMPLitude]
Related Commands [SOURce:]VOLTage[:LEVel][:IMMediate]:STEP[:INCRement] ,
[SOURce:]VOLTage[:LEVel][IMMediate][:AMPLitude] , [SOURce:]VOLTage[:
LEVel]:UP[:IMMediate][:AMPLitude]
[SOURce:]VOLTage[:LEVel][IMMediate][:AMPLitude]
This command is used to set the voltage level of the of the currently selected
channel. The units are V, mV or kV.
Group Source
2-32 Series 2200 Programmable Multichannel DC Power Supplies Programmer Manual