![background image](http://html1.mh-extra.com/html/tektronix/keithley-2200-series/keithley-2200-series_programming-reference-manual_1078449048.webp)
Commands Listed in Alphabetical Order
[SOURce:]VOLTage[:LEVel]:UP[:IMMediate][:AMPLitude]
[SOURce:]VOLTage[:LEVel][IMMediate][:AMPLitude]
Arguments
<voltage>
is the voltage in kV, V, mV, or
μ
V.
[SOURce:]VOLTage[:LEVel]:UP[:IMMediate][:AMPLitude] (No Query Form)
This command is used to increase the voltage level of the currently selected
channel by a step. The voltage step value can be set by the following command:
[SOURce:]VOLTage[:LEVel][:IMMediate]:STEP[:INCRement]
Group
Source
Syntax
[SOURce:]VOLTage[:LEVel]:UP[:IMMediate][:AMPLitude]
Related Commands
[SOURce:]VOLTage[:LEVel][:IMMediate]:STEP[:INCRement]
[SOURce:]VOLTage[:LEVel][IMMediate][:AMPLitude]
[SOURce:]VOLTage[:LEVel]:TRIGgered[:IMMediate][:INCRement]
This command is used to set the voltage level for the trigger function.
Group
Trigger
Syntax
[SOURce:]VOLTage[:LEVel]:TRIGgered[:IMMediate][:INCRement]
[SOURce:]VOLTage[:LEVel]:TRIGgered[:IMMediate][:INCRement]?
Arguments
<voltage>
is a
fl
exible decimal number (NRf) that may be type NR1, NR2 or
NR3. It speci
fi
es the voltage setting, which can range from 0 to the maximum
nameplate voltage of the power supply.
MIN
sets the voltage to the minimum level (0 V).
MAX
sets the voltage to the maximum level (note that the maximum level may be
somewhat higher than the nameplate).
UP
sets the voltage level to increase a step.
2-34
Series 2200 Programmable Multichannel DC Power Supplies Programmer Manual
Summary of Contents for KEITHLEY 2200 Series
