Tektronix KEITHLEY 2200 Series, Programming Reference Manual

Page: 54 / 104

Commands Listed in Alphabetical Order
Returns
<NR1>
is a decimal integer ranging from 0 through 255. The binary bits of the
speci fi ed channel's operation enable register are set according to this value.
STATus:OPERation:INSTrument:ISUmmary<x>:ENABle
This command is used to modify or query the operation enable register of a
channel, where <x> is 1, 2, or 3. 1, 2, and 3 are channel 1, 2, and 3, respectively.
Only 1 and 2 are available on two channel instruments. (See page 3-1,
Status
and Events .)
Group Status
Syntax
STATus:OPERation:INSTrument:ISUmmary<x>:ENABle
STATus:OPERation:INSTrument:ISUmmary<x>:ENABle?
Arguments
<mask>::=<NR1>
where
<NR1>
is a decimal integer ranging from 0 through 255. The binary bits of the
OENR are set according to this value.
register
Examples
STAT:OPER:INST:ISUM2:ENABle 2
STAT:OPER:INST:ISUM2:ENABle?
might return
2
, which would indicate that
only the Constant Current bit of the Operation Enable Register for channel 2
would affect the OPER bit of the Status Byte Register.
STATus:OPERation:INSTrument:ISUmmary<x>[:EVENt]? (Query Only)
This queries the operation event register summary of a channel, where <x> is 1, 2,
or 3. 1, 2, and 3 are channel 1, 2, and 3, respectively. Only 1 and 2 are available
on two channel instruments.(See page 3-1,
Status and Events .)
Group Status
Syntax
STATus:OPERation:INSTrument:ISUmmary<x>[:EVENt]?
Returns
<NR1>
is a decimal integer representation of the contents of the Operation Event
Register (OEVR) for the speci fi ed channel, ranging from 0 to 255.
2-40 Series 2200 Programmable Multichannel DC Power Supplies Programmer Manual