Installation Instructions
TDS6UP, TDS7UP, and CSA7UP Option CPU Upgrade Kit
7
1.
Assemble equipment and locate modules to be removed:
Locate the power
switch and AC power cord connector in Figure 2 on page 7.
2.
The instrument has a built-in soft power-off function that safely powers off
the instrument when you press the On/Standby switch.
3.
Power off the rear panel power switch before servicing the power cord.
4.
Orient the instrument:
Set the instrument so that the bottom is down on the
work surface and the rear is facing you.
5.
Remove line cord:
Find the line cord on the rear cover. Pull the line cord
away to remove from the AC power connector.
6.
Reinstallation:
Do in reverse step 5 to reinstall the line cord.
AC power
cord
Line fuse
holder
Line fuses
AC power cord
connector
Power
switch
Figure 2: Line cord removal
Line Cord