Installation Instructions
16
TDS6UP, TDS7UP, and CSA7UP Option CPU Upgrade Kit
b.
Slide the floppy drive assembly, with cable attached, out toward the rear
of the instrument. Place floppy drive assembly on top of the hard/CD
drive bracket.
c.
Remove the five T-15 Torx screws that secure NLX board assembly to
the chassis.
d.
Remove the five T-15 Torx screws that secure NLX board assembly to
the rear chassis.
e.
Grasp the front edge of the NLX board assembly and pull up on the
assembly to disconnect the Riser Adapter from the Processor board edge
connector.
f.
Remove the NLX board assembly from the instrument.