Installation Instructions
TDS6UP, TDS7UP, and CSA7UP Option CPU Upgrade Kit
17
Hard/CD drive
bracket
Remove floppy
drive assembly
from front chassis
Riser adapter
board
NLX board
assembly
Place floppy drive assembly on
top of hard/CD drive bracket
Leave floppy drive
cable attached
Processor board
edge connector
Figure 8: NLX assembly removal
4.
Remove the Riser Adapter and NLX Boards:
See Figure 9 on page 18.
a.
Remove the screws that secure the hard/CD drive bracket to the NLX
board assembly.
b.
Remove the two T-15 Torx screws that secure Riser Adapter board to the
NLX support bracket.
c.
Disconnect the ribbon cable connectors from the floppy drive, hard
drive, and CD drive.