Installation Instructions
6
TDS6UP, TDS7UP, and CSA7UP Option CPU Upgrade Kit
This subsection contains the following items:
H
This preparatory information that you need to properly do the procedures
that follow.
H
List of tools required to remove and disassemble all modules.
H
Procedures for removal and reinstallation of the electrical and mechanical
modules.
WARNING.
Before doing any procedure in this subsection, disconnect the power
cord from the line voltage source. Failure to do so could cause serious injury or
death.
NOTE
. Read Equipment list for a list of the tools needed to remove and install
modules in this instrument. See Table 1, on page 3.
Equipment Required.
Most modules in the TDS6000, TDS7000, and CSA7000
Series Instruments can be removed with a screwdriver handle mounted with a
size T-15, Torx screwdriver tip. Use this tool whenever a procedure step instructs
you to remove or install a screw unless a different size screwdriver is specified in
that step. All equipment required to remove and reinstall each module is listed in
the first step of the procedure.
Procedures for External Modules
The following procedures are found here and are listed in the order presented.
H
Line Cord
H
Trim (all)
H
Bottom cover
H
Left and Right covers