Installation Instructions
TDS6UP, TDS7UP, and CSA7UP Option CPU Upgrade Kit
19
CD drive
interface board
CD drive
#0 Phillips
screw (4)
CD drive bracket
CD drive
ribbon cable
Disconnect
J230 CD drive
ribbon cable
T--15 Torxdrive
screw (2)
Figure 10: CD drive and bracket removal
Install
This section provides instructions for reassembly of the instrument and
reinstalling the operating software.
1.
Reinstall the CD drive, riser adapter, and NLX board assembly (refer to page
18).
2.
Reinstall left and right covers (refer to page 11).
3.
Reinstall the bottom cover (refer to page 10).
Reassemble and Install