Installation Instructions
TDS6UP, TDS7UP, and CSA7UP Option CPU Upgrade Kit
11
1.
Remove the left and right covers:
See Figures 5 and 6 on pages 12 and 13.
H
Trim (all)
H
Bottom cover
2.
Orient the instrument:
Set the instrument so that its rear is on the work
surface and the front of the instrument is facing you.
NOTE
. All mounting screw holes are indicated by a star etched around the
mounting hole.
a.
Remove the eleven T-15 Torx screws that secure the covers to the top
and both sides of the chassis.
b.
Remove the seven T-15 Torx screws that secure the covers to the bottom
of the chassis.
c.
Pull the bottom-right cover down and slide to the right to remove from
the instrument. Pull the top-left cover upward and slide to the left to
remove from the instrument.
CAUTION.
Take care not to bind or snag the covers on the internal cabling of the
instrument as you remove or install.
3.
Reinstallation:
Do in reverse steps a through c to reinstall the cabinet covers.
Covers