TDS6UP, TDS7UP, and CSA7UP Option CPU Upgrade Kit
5
Installation Instructions
This section contains all procedures needed to install TDS6UP, TDS7UP, or
CSA7UP Option CPU in the TDS6000, TDS7000, and CSA7000 Series
instruments.
These instructions are for personnel who are familiar with servicing the product.
If you need further details for disassembling or reassembling the product, refer to
the appropriate product manual. Contact your nearest Tektronix Service Center
or Tektronix Factory Service for installation assistance.
CAUTION.
To prevent static discharge damage, service the product only in a
static-free environment. Observe standard handling precautions for static-sensi-
tive devices while installing this kit. Always wear a grounded wrist strap,
grounded foot strap, and static resistant apparel while installing this kit.
Remove
This section contains procedures for removal and installation of all mechanical
and electrical modules.
H
Line Cord
H
Trim (all)
H
Bottom cover
H
Left and Right covers
H
NLX board
H
Rear chassis
H
CD drive bracket
Preparation
WARNING.
Before doing this or any other procedure in this manual, read the
Safety Summary found at the beginning of this manual.