Tektronix, Inc. DG2040, User Manual

Page: 164 / 266

Reference
3Ć76
DG2040 Data Generator
BK0 BK1 BK1 BK2 BK2
BK0 1
BK1 Infinite
BK2 2
BK3
BK4 2
5
On
2 1
2
3
0
4
On
BK3 BK3 BK4
0
BK1 BK1 BK1
0
1 2 3
4
0
1
BK4 BK0
Line No. Block
Repeat
Count
Trigger Input
(Trig Wait)
Event Jump
Line No.
Sequence Output
Trigger Input
Event Input
Trigger input
wait state
Jump to line No. 2
on an event input.
Jump to line No. 0
on an event input.
Figure 3Ć64: Enhanced Mode sequence output
This Run Mode function sets the update method for rewriting data to the output
when pattern data, the sequence, or other items are changed. Select Auto or
Manual.
Auto.
Rewrites the output data with new data immediately at the point when any
change occurs to the pattern data. The START/STOP button LED indicator
blinks rapidly during data update.
Manual.
The output data is not immediately rewritten when the pattern data is
changed. When the displayed data and the output data differ, the START/STOP
buttons LED indicator blinks slowly. To rewrite the pattern data, stop data output
temporarily by pressing the START/STOP button, and then restart output by
pressing the START/STOP button once again. Also note that changed pattern
data is also written when the run mode changes.
Operation.
Do the following to set the data update method.
Bottom button PopĆup menu Side button
Run Mode Update (Select Auto
or Manual)
Update