Tektronix, Inc. DG2040, User Manual

Page: 141 / 266

Reference
DG2040 Data Generator
3Ć53
Operation.
Do the following to move or copy pattern data.
Bottom button PopĆup menu Side button
Enhanced Action Bit Operation OK
Region (Select All or
Entered)
Set the parameters in the popĆup menu.
(Src Bit, Operation, Dest Bit, From, and Size)
OK
This Enhanced Action menu function converts data in the source by writing
specified output data to the destination as one set of patterns is found in the
source data.
Refer to Conversion Table Examples on page C-3 for examples of how to
convert pattern data to different format.
PopĆup Menu.
The menu for setting the bit and area that will be the code
conversion source data, and the bit and area where the result of the code
conversion will be written is displayed using the following operation. (See
Figure 3-49.) Select the item with the up and down arrow buttons, and use the
general purpose knob and the numeric keys to set the parameter value.
Bottom button PopĆup menu Side button
Enhanced Action Serial Code Converter OK
Figure 3Ć49: Serial Code Converter menu
Table 3-14 describes the parameter items.
Serial Code Converter