Tektronix, Inc. DG2040, User Manual

Page: 98 / 266

Reference
3Ć10
DG2040 Data Generator
The Save Data & Setup functions stores the pattern data, block, group, sequence
and setup data from the instruments internal memory to mass memory (3.5 inch
floppy disk) in the DG2040 Data Generator format.
Submenu
Item Function
Clear String Deletes the current displayed string.
Change Directory Changes the current directory.
Operation
Do the following to save the pattern data and setup parameters:
Bottom button PopĆup menu Side button
Insert a writeĆenabled 3.5 inch floppy disk in the floppy disk drive.
File
Save Data & Setup
Enter the file name for the data to be saved. OK
The Import function loads the pattern data from mass memory (3.5 inch floppy
disk) into pattern memory. The DG2040 can read the following data formats:
H
Tektronix TDS series waveform data (file extension: .WFM)
H
Tektronix TLS series group data (file extension: .GRP)
H
Tektronix AWG2000 series waveform data (file extension: .WFM)
H
Tektronix DG2000-Series and DG2040 Data Generator waveform data (file
extension: .PDA)
H
CSV format data (file extension: .CSV). Refer to page 3-13 for instructions
regarding formatting data in a CSV format.
Pop-up menu parameter settings are used to specify the read-in method.
Operation
.
Do the following to import pattern data from mass memory.
Bottom button PopĆup menu Side button
Insert the 3.5 inch floppy disk in the drive.
File
Import Data
Select the file to be read in. OK
Change the parameters as required. OK
Save Data & Setup
Import