Tektronix, Inc. DG2040, User Manual

Page: 148 / 266

Reference
3Ć60
DG2040 Data Generator
This Make Sequence menu function deletes and registers sequences.
Submenu
Item Function
Delete All Deletes all sequences.
Make Simple
Sequence
Registers all currently defined blocks in order as a sequence.
Edit Subsequence Creates or edits a subsequence. This subsequence can be included in
the sequence and will be expanded into the sequence when executed.
A subsequence can be created and edited the same as a sequence,
using the reduced menu structure. However only block and repeat
count can be defined in the subsequence.
Refer to
Creating and Editing Subsequences.
In this Make Sequence menu function you can create a subsequence or edit an
existing subsequence. Use the menu items under the Edit Subsequence menu
item.
Item Function
New Creates a new subsequence. When New is selected, the Make
SubĆSequence popĆup menu and the side menus, including Insert,
Delete, Repeat and OK also appear. Use these menu items to create a
subsequence.
Open Opens a subsequence to be edited. When the Open is selected, the
popĆup menu appears for the subsequence selection list. Select a
subsequence from the list, then the Make SubĆSequence popĆup menu
and the side menu including Insert, Delete, Repeat and OK appear.
Use these menu items to edit the subsequence.
Remove Removes a subsequence. When Remove is selected, the popĆup menu
for the subsequence selection list appears. Select a subsequence to be
removed.
Clear Removes all existing subsequences.
Special
Creating and Editing
Subsequences