Tektronix, Inc. DG2040, User Manual

Page: 27 / 266

Getting Started
DG2040 Data Generator
1Ć7
Options
This subsection describes the options available for the DG2040 Data Generator.
The following options are available:
Option 1R (Rack mounting)
Option D1 (Test result report)
Each of these options is discussed in detail in the following paragraphs.
When ordered with option 1R, the DG2040 Data Generator is shipped configured
for mounting in a 19-inch rack. The floppy disk drive is moved so that it can be
accessed from the front panel in this instrument.
If you need to configure a standard DG2040 Data Generator for mounting in a
19-inch rack refer to Table 1-4 Optional accessories on page 1-6 for the
Tektronix part number for the rackmount kit.
A calibration data test result report will be provided with the DG2040 Data
Generator when this option is specified.
Installation
Before you begin the installation, refer to the General Safety Summary at the
front of this manual for power source, grounding, and other safety information.
Verify that you have the correct operating environment.
CAUTION.
Damage to the instrument can occur if this instrument is powered on
at temperatures outside the specified temperature range.
The DG2040 Data Generator operates correctly in ambient temperatures from
+10
_
C to +40
_
C and in relative humidity from 20% to 80%. For more
operating environment information, refer to Appendix A: Specifications.
NOTE
. If you are installing the instrument in a dedicated rack, refer to the
instruction sheet that comes with the rack mounting kit for proper installation
procedures.
Verify that there is at least 2.5 cm (1 inch) of clearance on top and bottom, 15.0
cm (6 inches) on the left and right sides, and 7.5 cm (3 inches) at the rear of the
instrument to allow for heat dissipation. Verify that the air intake holes on the
sides and bottom of the cabinet are not obstructed.
Option 1R (Rack Mount)
Option D1 (Test Result
Report)
Environment