Tektronix, Inc. DG2040, User Manual

Page: 121 / 266

Reference
DG2040 Data Generator
3Ć33
Knob Icon
Cursor Value Point Cursor Editing Area Cursor
Width Value
Scope
Figure 3Ć23: Edit area
The location or range that the editing operation applies to is set as follows:
H
Point Position Input. The range is determined by the Width value. To set the
width value, move the knob icon to the Width value display by pressing the
front panel CURSOR button. Enter the value with the general purpose knob
or the numeric keys.
To set the position move the knob icon next to the Cursor position display
by pressing the front panel CURSOR button. Enter the value with the
general purpose knob or the numeric keys.
H
Group/bit Input. The groups or bits to be included in the range are set using
the Execute Action
!
Set scope item.
Bottom button PopĆup menu Side button
Execute Action Select Set scope. OK
Determine the scope. OK