66
6)
Switch IP/ICP power on
7)
Connect Astra-984 adapter to PC via USB
8)
Further procedure is the same as for Astra-8945 Pro
13.2.10 Astra-823 Relay Unit (RU)
1)
Switch off the power of the RU; disconnect the device from RS-485 interface
2)
Install jumper on F2 plug
3)
Connect Astra-984 adapter to the RU; power up the device
4)
Connect Astra-984 adapter to PC via USB
5)
Further procedure is the same as for Astra-8945 Pro
13.2.11. HKP Astra-814
1)
witch off the power of the HKP; disconnect the device from RS-485 interface
2)
While holding down the "
#
" key, switch power on
3)
Connect HKP to PC via USB
4)
Run
FW Update Module,
wait for the devices descriptors to be read out.
5)
Select HKP on the
Device
tab
6)
Drag&drop available FW file to the HKP to start updating
7)
After the loading file into device is completed, wait for HKP to restart
8)
To check the result follow the procedure from p.1) to p.3), wait for the device de-
scriptor to be read out
9)
Disconnect the HKP from USB, press "
#
" key to restart the device
For the HKP the firmware update mode is available also from the device menu (6.Device /
4. FW Update) after entering the device menu with Engineer PIN.
Summary of Contents for ASTRA ZITADEL
