teko ASTRA ZITADEL, Quick Start Manual

Page: 39 / 94

39
9.1.1. The Procedure.
1)
Place the system equipment on worktable at the facility close to the Control Panel and
the computer with MS SQL Server and MSS Astra-Pro installed.
2)
Wire system components in accordance with Wiring Diagram of Paragraph 6 of this
Guide.
3)
Connect the Control Panel to the computer via USB.
4)
Launch the Core Service using Core Manager . By default the Core Service is
launched automatically at PC start up.
When the MSS is installed, the DB contains a single user with Engineer permissions and
a pre-set PIN
«1 2 3 4 5 6»
; therefore, the launched Core receives this PIN as the access
password for administration when it communicates with the DB . The Engineer PIN is
active in the Core until it is changed and recorded to the DB or recorded to the Control
Panel memory, which entails automatic updating of the DB . As soon as it is recorded to
the DB , the new PIN is active in the Core .
5)
Launch the Setup Module, login with Engineer PIN. After the PIN is entered, the
Module
’s interface is set up according to
Engineer permissions, i.e. full access is granted
to system settings.
6)
Establish connection with the device by clicking in the toolbox. In some cases,
when changes have been made during a previous setting session and written to the DB
but not to the device, there may be discrepancies in the settings. In this case, the Core
exports a record of discrepancies to a separate screen.