teko ASTRA ZITADEL, Quick Start Manual

Page: 52 / 94

52
10.2. TESTING OF INSTALLED EQUIPMENT
There are two testing methods:
1. Real alarm activation method
2. Test method. Recommended for regular system maintenance works.
10.2.1. Test method
Operability test with red button of Astra-942 laser tester is available for all 2.4 GHz wire-
less devices (except Astra-Z-3245) and for two 433 MHz devices Astra-4511 RF2 and As-
tra-421 RF2.
1) Press the red button and irradiate LED of the device
2) Make sure the LED lights up red. That means successful receipt of the command.
3) Make sure Test message is displayed on the Monitor interface in the System
Structure window, Event Log window and floor plan:
4) Test method
doesn’t affects relay outputs and voice alerting.
5) You can check Test status of a device with status request command from Wireless
Devices list in the MSS Setup Module.