teko ASTRA ZITADEL, Quick Start Manual

Page: 60 / 94

60
13 FIRMWARE UPDATE
13.1 GENERAL INFORMATION
1) FW Update Utility of MSS Astra-Pro Software is used to update firmware of any
hardwired or 2.4 GHz wireless device.
2) Firmware files (except those of wireless devices) are included into MSS installation
package.
3) After MSS installation on a PC, firmware files are stored in the Base folder
For firmware update USB AM/BM cable or Astra-984 adapter (not included) is used.
Wireless devices of 2.4 GHz networks are updated via Astra-985 interface (not included).
13.2 HARDWIRED DEVICES FW UPDATE PROCEDURE
13.2.1. Astra-8945 Pro
1) Switch off the power, disconnect USB, disconnect RS-485 interface
2) Install jumper on F1 plug. Power up the device.
3) Connect Control Panel to PC via USB
4) Run FW Update Module, wait for the device descriptor to be read out.