teko ASTRA ZITADEL, Quick Start Manual

Page: 48 / 94

48
10. MOUNTING DEVICES AT A SECURED FACILITY
10.1. GENERAL RECOMMENDATIONS
WARNING!
If after complete system configuration, but before mounting equipment on-
site it should be stored for a long time, we recommend taking battery cells
out of wireless devices in order to save their capacities.
In case the 433 MHz wireless devices are kept with battery cells taken out for more
than 2 weeks, de-
synchronization between wireless devices and their “parent” de-
vices may take place. Further it will require re-registering wireless devices again.
1) First mount the Control Panel Astra-8945 Pro, all hardwired devices and alarm
loops cables. Switch the power on.
2) Perform sequential mounting of routers, switching on the power starting from those
closest to the control panel and moving to those farthest ones. Installation in this
order automatically creates optimal data transfer routes within wireless networks
2.4 GHz.
3) Install WE 433 intended to working in repeater mode.
4) Check communication quality. Run Setup Module , open Wireless Devices list
and perform status request for selected device from the right-click menu. Make
sure that communication level is not less than 2 (out of 8) for 2.4 GHz devices and
5 (out of 13) for 433 MHz devices.