91
•
Save to the Experiment library folder if required (see section 3.4.6). Note that saving will
over-write the previous version of the experiment.
IMPORTANT:
Certain characters must not be used in the file name otherwise it may
become corrupted and you may not be able to open the Results file. These characters
are: < > & ‘ “
A box will now appear asking to save the results in the Results library.
•
Change the file name of the Results file if required. The file will automatically be saved to
the directory My Documents\Quansoft\Results but the destination can be changed by
browsing the file directory shown in the
Save in:
drop-down menu. A final message will
appear asking whether to start the run.
•
Click
OK
to confirm and the run will initiate
3.5.1.6
Warning messages
The user will be alerted if:
•
The plate drawer has not been accessed (an indication that a plate has not been loaded).
•
The lid of the unit is open.
•
The plate drawer is open.
A prompt will appear requiring the user to confirm that the relevant action has been taken i.e. close
the lid/drawer or load the plate.
