5. Operation
2004-11
Operating Manual for the LS Series Scanner No. 30001798 Rev. No. 1.5
5-3
5.1.3
Connect to Instrument
When the software connects to the instrument, communication is established
between the instrument and the user interface. The instrument is ready for
operation.
5.1.4
Finish a Measurement Session
Disconnect from Instrument
When disconnecting, communication between the instrument and the PC is
terminated.
Note
Please remove the recently measured sample before disconnect.
Instrument Shut Down
Upon shut down, the instrument activity is stopped immediately. Normally, you
should disconnect before shut down. In the rare case of an unexpected hardware
error, immediate instrument shut down will reduce the risk of possible damage.