6. LSServer, Scanner Shell and Download
2004-11
Operating Manual for the LS Series Scanner No. 30001798 Rev. No. 1.5
6-27
Laser Control
In the
Measurement Control
dialog box, select
Laser Control…
and the
Lamp /
Laser Control
dialog box appears.
All lasers installed in your instrument are shown in the dialog box:
Click
OK
to save the changes and close the dialog box.
In the
Laser Control
dialog box specific lasers (1-4) can be activated /
deactivated and laser power can be set (Laser 4).
The
Laser Control
dialog box contains the following elements:
Laser 1
(633 nm)
check box
Select
Laser 1
check box to activate the 633 nm laser.
Red LED is switched on at the rear of the instrument.
Laser 2
(532 nm)
check box
Select
Laser 2
check box to activate the 532 nm laser.
Green LED is switched on at the rear of the instrument.
Laser 3
check box
Select
Laser 3
check box to activate the 594 nm laser and
the orange LED is switched on at the rear of the
instrument.
Laser 4
check box
Select
Laser 4
check box to activate the 488 nm laser and
the blue LED is switched on at the rear of the instrument.
(The blue laser can be power controlled).
OK
button
Click
OK
to save the selected options and close the dialog
box.
Cancel
button
Click the
Cancel
button to close the dialog box.
The selected options are not saved.
Help
button
Click the
Help
button to display the online help for the dialog
box.