6-4
EM18-33017
6. DIAG. TEST OPERATION
#
Item
Count Condition
Range
0.0 ~ 3200.0 km
0.0 ~ 200.0 km
0.0 ~ 200.0 km
0 ~ 2000 hours
0 hour
0 ~ 255 times
0 ~ 15 times
0 ~ 15 times
0 ~ 1000000
times
0 time
Total media distance
covered
Counts every cut. [See NOTE 3.]
Uncounted because this printer has no solenoid.
Counted when a momentary power failure occurs.
Media distance covered
Print distance
Cut count
Solenoid driving time
System error count
RS-232C hardware
error count
Momentary power
failure count
Head up and down
count
Ribbon motor driving
time
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
Counted when the feed motor drives to feed,
printand issue the media. (Counted also during
ribbonsave operation and back feed.) [See NOTE 2.]
Counted while printing. (Feeding and issuing media,
and ribbon saving operation are not counted.)
[See NOTE 2.]
Uncounted because this printer has no solenoid.
Counts when the ribbon motor drives to feed, print
and issue the media. (The driving time is not
counted during ribbon saving operation, but is
during back feed.) [See NOTE 4.]
Counted when a parity, overrun or framing error
occurs. [See NOTE 5.]
Counted when a zero-dividing error occurs or
undefined command is retrieved.
NOTES:
1.
Item from( 2) through (10) are initialized to “0” after RAM clear.
2.
If the distance is 5.5 m or less, it is rounded down and no data is added to the
memory at power off.
3.
If the count is 31 counts or less, it is rounded down and no data is added to the
memory at power off.
4.
If the driving time is 27 sec. or less, it is rounded down and no data is added to the
memory at power off.
5.
When a sent command results in an error, the same number as the data capacity
of the command is counted by byte.
(Revision Date: Dec. 10 ‘99)
6.2 SELF TEST MODE
■
Sample Print
[Print Condition]
• Preset count
: 1
• Print speed
: 101.6 mm/sec.
• Sensor
: No sensor
• Printing method : Thermal transfer
• Supply length
: 50 mm
• Issuing mode
: Batch printing
(without rewinder)
1) Maintenance Counter
Fig. 6-1
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(25)
(26)
(27)
(28)
(29)
(30)
(31)
(32)
(33)
TL FEED
1882.3km
FEED
20.5km
15.0km
CUT
148150
HEAD U/D
170
RIBBON
32h
SOLENOID
0h
232C ERR
1
SYSERR
0
PW FAIL
0
FONT
[PC-850] [0]
CODE
[ESC LF NUL]
RIBN
[TRANS.]
[PC]
FEED
-10.0mm
CUT
-5.0mm
BACK
+3.0mm
TONE(T)
+3step
TONE(D)
+5step
[KEY]
FEED
+5.0mm
CUT
-1.5mm
BACK
+0.5mm
TONE(T)
+0step
TONE(D)
+1step
X ADJ.
+35.0mm
RIBN ADJ. [PC] + 0 +0 [KEY] + 0 +0
STATUS [OFF]
THRESHOLD R 1.0V
THRESHOLD T 1.4V
KANJI [TYPE1]
EURO CODE B0H
HEAD [TYPE1]
DTR/RTS [DTR]
INPUT PRIME [ON]
(14)
(15)
(16)
(17)
(18)
(19)
(20)
(21)
(22)
(23)
(24)
