6-25
EM18-33017
6. DIAG. TEST OPERATION
Power off
Turn on the power while
holding down the [FEED]
key and [PAUSE] key.
< 1
D I A G N O S T I C
V 1 . O A
>
Press the [FEED] key.
< 2
P A R A M E T E R
S E T
>
Press the [PAUSE] key seven times.
Select either chracter code with
the [FEED] key or [RESTART]
Key.(See NOTE1.)
Press the [FEED] key
and [RESTART] key
at the same time.
Press the [PAUSE] key .
Continued on Section 6.3.7
Font zero selection.
F O
T
C O D E
P C - 8 5 0
N
NOTES:
1.
Holding the [FEED] key or [RESTART] key down for more than 0.5 seconds
enables a fast forward.
2.
A changed font code is stored in memory by pressing the [PAUSE] key.
•
PC-850
•
PC-8
6.3 PARAMETER SETTING MODE
6.3.6
Character Code Selection
