6-2
EM18-33017
6. DIAG. TEST OPERATION
Power on
Press the [PAUSE] key. (See NOTE 1.)
O N
L I N E
Press the [PAUSE] key.
Press the [PAUSE] key.
< 2
P A R A M E T E R
S E T
>
Press the [RESTART] key.
< 1
R E S E T
>
Hold down the [RESTART] key for
more than 3 seconds. (See NOTE 2.)
Refer to Section 6.3 Parameter Setting Mode
for the following procedure.
(See NOTE 3.)
Press the [PAUSE] key.
Indicates the number of
remaining media when the
[PAUSE] key is pressed.
P A
S E
5
U
NOTES: 1.
Pressing the [PAUSE] key during printing causes the printer to pause printing and show
the number of remaining media.
2.
If the [RESTART] key is released within 3 seconds, the printer will resume printing
because the [RESTART] key is activated.
3.
Since the reset is performed when terminating this mode, the printer cancels the
remaining media and returns to on-line mode. This reset will not clear the changed
parameter settings.
6.1 OUTLINE OF THE DIAG. TEST OPERATION
■
Type 2
The parameter setting such as feed length fine adjustment or cut/strip position fine adjustment can
be changed while the printer is on-line or printing. Pressing the [PAUSE] key cause the printer to enter
parameter setting mode. Rest mode is provided for this procedure to cancel the steps which follow
the [PAUSE] key without turning the power off.
