TDK-Lambada HWS?HWS, User Manual, Page: 38 / 133

(*1) Output voltage might be unstable when start up at -40 to -10
℃
and no load. In that case, apply minimum output current.
(*2) At 100/200VAC, Ta=25
℃
and maximum output power.
(*3) For cases where conformance to various safety specs (UL, CSA, EN) are required,to be described as 100 - 240VAC
(50/60Hz).
(*4) Not applicable for the in-rush current to noise filter for less than 0.2ms.
(*5) Measure with JEITA RC-9131A probe, bandwidth of scope :100MHz.
(*6) 85 - 265VAC, constant load.
(*7) No load-Full load, constant input voltage.
(*8) Constant current limit and hiccup with automatic recovery.
Not operate at over load or dead short condition for more than 30 seconds.
(*9) OVP circuit will shutdown output, manual reset (re power on).
(*10) At 100/200VAC, nominal output voltage and maximum output current.
(*11) Measured by the each measuring method of UL, CSA, EN and DENAN (at 60Hz).
(*12) Ratings - Derating at standard mounting.
- Load (%) is percent of maximum output power or maximum output current, whichever is greater.
- As for other mountings, refer to derating curve.
- For conditions of start up at -40
℃
to -10
℃
, refer to derating curve.
(*13) Category 4 exposure levels : Track transportation over U.S. highways, composite two-wheeled trailer.
(*14) As for DENAN, dsigned to meet at 100VAC.
ITEMS/UNITS MODEL HWS150-3/HD
HWS150-5/HD HWS150-12/HD HWS150-15/HD HWS150-24/HD HWS150-48/HD
Input
Voltage Range (*3) V AC85 - 265 or DC120 - 370
Frequency (*3) Hz 47 - 63
Power Factor (100/200VAC)(typ) (*2) 0.98 / 0.90 0.99 / 0.95
Efficiency (100/200VAC)(typ) (*2)
％
78 / 81 83 / 86 85 / 88
Current (100/200VAC)(typ) (*2) A 1.3 / 0.65 1.9 / 0.95
Inrush Current (100/200VAC)(typ) (*4) A 14 / 28, Ta=25
℃
, cold start
Leakage Current (*11) mA Less than 0.5. (0.2 (typ) at 100VAC / 0.4 (typ) at 230VAC)
Output
Nominal Voltage VDC 3.3 5 12 15 24 48
Minimum Current (*1) A 0.3 0.1 0.07 0.03
Maximum Current A 30 13 10 6.5 3.3
Maximum Power W 99 150 156 150 156 158.4
Maximum Line Regulation (*6) mV 20 48 60 96 192
Maximum Load Regulation (*7) mV 40 96 120 192 384
Temperature Coefficient Less than 0.02% /
℃
Maximum Ripple & Noise (0<Ta<71
℃
) (*5) mVp-p 120 150 200
Maximum Ripple & Noise (
−
10<Ta
＜
0
℃
) (*5) mVp-p 160 180 240
Hold-up Time (typ) (*10) ms 20
Voltage Adjustable Range VDC 2.97 - 3.96 4.0 - 6.0 9.6 - 14.4 12.0 - 18.0 19.2 - 28.8 38.4 - 52.8
Function
Over Current Protection (*8) A >31.5 >13.6 >10.5 >6.82 >3.46
Over Voltage Protection (*9) VDC 4.13 - 4.95 6.25 - 7.25 15.0 - 17.4 18.8 - 21.8 30.0 - 34.8 55.2 - 64.8
Remote Sensing Possible
Parallel Operation -
Series Operation Possible
Line DIP Designed to meet SEMI-F47 (200VAC Line only)
Environment
Operating Temperature (*12)
℃
-10 to +71 (-10 to +50: 100%, +60: 60%, +71: 20%)
Guarantee start up at -40 to -10
Storage Temperature
℃
-40 to +85
Operating Humidity
％
RH 30 - 90 (No dewdrop)
Storage Humidity
％
RH 10 - 95 (No dewdrop)
Vibration (*13)
At no operating, 10 - 55Hz (sweep for 1min)
19.6m/s² constant, X, Y, Z 1hour each.
Designed to meet MIL-STD-810F 514.5 Category 4, 10
Shock (In package)
Less than 196.1m/s²
Designed to meet MIL-STD-810F 516.5 Procedure I, VI
Cooling Convection cooling
Isolation
Withstand Voltage
Input - FG : 2kVAC (20mA), Input - Output : 3kVAC (20mA)
Output - FG : 500VAC (100mA) for 1min
Isolation Resistance More than 100M
Ω
at 25
℃
and 70%RH Output - FG : 500VDC
Standards
Safety Standards (*14)
Approved by UL60950-1, CSA C22.2 No.60950-1, EN60950-1, EN50178
Designed to meet UL508, DENAN
PFHC Designed to meet IEC61000-3-2
EMI Designed to meet EN55011/EN55022-B, FCC-B, VCCI-B
Immunity
Designed to meet IEC61000-4-2(Level 2,3), -3(Level 3), -4(Level 3),
-5(Level 3,4), -6(Level 3), -8(Level 4), -11
Mechanical
Weight (typ) g 500
Size (W x H x D) mm 37 x 82 x 160 (Refer to outline drawing)
Please refer to "TDK-Lambda
EMC Filters" catalog.
RSEL-2003W
●Recommended EMC Filter
HWS
150/HD
HWS150/HD Specifications
(Read instruction manual carefully, before using the power supply unit.)
38
・All specifications are subject to change without notice.
Instruction Manual
HWS
HWS HD
HWS ME
HWS-P