TDK-Lambada HWS?HWS, User Manual, Page: 24 / 133

24
・All specifications are subject to change without notice.
Instruction Manual
HWS
HWS HD
HWS ME
HWS-P
ITEMS/UNITS
MODEL
HWS1000
-3
HWS1000
-5
HWS1000
-6
HWS1000
-7
HWS1000
-12
HWS1000
-15
HWS1000
-24
HWS1000
-36
HWS1000
-48
HWS1000
-60
Input
Voltage Range (*2) V AC85 - 265 or DC120 - 330
Frequency (*2) Hz 47 - 63
Power Factor (100/200VAC)(typ) (*1) 0.98 / 0.95
Efficiency (100/200VAC)(typ) (*1) ％ 71 / 73 76 / 78 79 / 81 80 / 82 82 / 85 83 / 85 85 / 87 85 / 88 86 / 88 85 / 88
Current (100/200VAC)(typ) (*1) A 9.6 / 5.0 13.5 / 7.0
Inrush Current (100/200VAC)(typ) (*3) A 20 / 40
Leakage Current (100/240VAC) (*10) mA 1.2 max
Output
Nominal Voltage VDC 3.3 5 6 7.5 12 15 24 36 48 60
Maximum Current A 200 167 134 88 70 46 30.7 23 18.4
Maximum Peak Current (*13) A − 160 100 80 58.5 39 29.2 23.4
Maximum Power W 660 1000 1002 1005 1056 1050 1104
Maximum Peak Power (*13) W − 1200 1404
Maximum Line Regulation (*5) mV 20 36 48 60 96 144 192 240
Maximum Load Regulation (*6) mV 40 60 100 120 150 300 360
Temperature Coefficient Less than 0.02%/ ℃
Maximum
Ripple & Noise (*4)
0 to +71 ° C mVp-p 120 150 200 400
-10 to 0 ° C mVp-p 160 180 240 500 600
Hold-up Time (typ) (*9) ms 20
Voltage Adjustable Range VDC 2.64 - 3.96 4.0 - 6.0 4.8 - 7.2 6.0 - 9.0 9.6 - 14.4 12.0 - 18.0 19.2 - 28.8 28.8 - 43.2 38.4 - 52.8 48.0 - 66.0
Function
Over Current Protection (*7) A >210.0 >175.3 >168.0 >105.0 >84.0 >61.4 >40.9 >30.6 >24.5
Over Voltage Protection (*8) VDC 4.12 - 4.62 6.25 - 7.0 7.5 - 8.4 9.37 - 10.5 15.0 - 17.4 18.7 - 21.8 30.0 - 34.8 45.0 - 49.7 55.2 - 60.0 69.0 - 75.0
Remote Sensing Possible
Remote ON/OFF Control Possible
Parallel Operation Possible
Series Operation Possible
Monitoring Signal PF (Open collector output)
Line DIP Built to meet SEMI-F47 (200VAC line only)
Environment
Operating Temperature (*11) ℃ -10 to +71 , start up -20 to +71
-10 to +40 ℃ ％ 100
+50 ℃ ％ 83.9 100
+71 ℃ ％ 50
Storage Temperature ℃ -30 to +85
Operating Humidity ％ RH 10 - 90 (No Condensing)
Storage Humidity ％ RH 10 - 95 (No Condensing)
Vibration At no operating, 10 - 55Hz (sweep for 1min.) 19.6m/s² constant, X, Y, Z 1hour each.
Shock (In package) Less than 196.1m/s²
Cooling Forced air by blower fan
Isolation
Withstand Voltage
Input - FG : 2kVAC (20mA), Input - Output : 3kVAC (20mA)
Output-FG : 500VAC (300mA) (60V model 651VAC (390mA)), Output-CNT:100VAC (100mA) for 1min.
Isolation Resistance
More than 100M Ω Output - FG : 500VDC
More than 10M Ω Output - CNT 100VDC at 25 ℃ and 70%RH
Standards
Safety Standards (*12) Approved by UL60950-1, CSA C22.2 No60950-1, EN60950-1,EN50178. Built to meet DENAN.
PFHC Built to meet IEC61000-3-2
EMI Built to meet EN55011/EN55022-B, FCC-ClassB, VCCI-ClassB, CISPR-ClassB.
Immunity
Built to meet IEC61000-4-2(Level 2,3), -3(Level 3), -4(Level 3),
-5(Level 3,4), -6(Level 3), -8(Level 4), -11
Mechanical
Weight (max) g 3200
Size (W x H x D) mm 126.5 x 82 x 240 (Refer to outline drawing)
(*1) At Ta=25
℃
and maximum output power.
(*2) For cases where conformance to various safety specs (UL, CSA, EN) are required,
input voltage range will be 100 - 240VAC (50/60Hz).
(*3) First in-rush current. Not applicable to the first 0.2ms in-rush current flowing into the power supply noise filter.
(*4) Measure with JEITA RC-9131A probe, bandwidth of scope :100MHz.
（
At 100uF electric capacitor and 0.47uF film capacitor on the test fixture board.)
(*5) 85 - 265VAC, constant load.
(*6) No load-full load, constant input voltage.
(*7) Constant current limit with automatic recovery. Over current condition for more than 5 seconds will cause the
output to shutdown.
Output current exceeding maximum rated output current for more then 10 seconds continuously will result to
output shutdown.
(*8) OVP circuit will shut down output, manual reset (power cycle) or ON/OFF CNT signal reset.
(*9) At 100/200VAC, nominal output voltage and maximum output current.
(*10) Measured by the each measuring method of UL, CSA, EN and DENAN (at 60Hz), Ta=25 ℃ .
(*11) Ratings - Derating at standard mounting.
- Load (%) is percent of maximum output power or maximum output current, whichever is greater.
- As for other mountings, refer to derating curve.
(*12) As for DENAN, built to meet at 100VAC.
(*13) Peak output current is less than 10 seconds, and duty 35% max.(200VAC Line only)
Please refer to "TDK-Lambda
EMC Filters" catalog.
●Recommended EMC Filter
RSEN-2020
HWS
1000
HWS1000 Specifications
(Read instruction manual carefully, before using the power supply unit.)