TDK-Lambada HWS?HWS, User Manual, Page: 115 / 133

115
・All specifications are subject to change without notice.
Instruction Manual
HWS
HWS HD
HWS ME
HWS-P
FG L3 L2 L1
Load
＋ −
M8 Bolts and nuts for connecting
to the load line.
(These are not attached to the
product.)
Connector : (JST) S12B-PHDSS
Attached connector when shipping
･Housing : (JST) PHDR-12VS
･Contact : (JST) SPHD-001T-P0.5
2− + of output, 4− - of output are connected.
7−8, 9−10 are shorted
Conn
Remo
custo
･Hou
･Con
2− +
7−8
* Plea
NAME PLATE
・12-60V model
① CS terminal to +V terminal and -S terminal to
-V terminal with sensing wires.
② Connect CNT terminal to TOG terminal with wire.
③ Connect PV terminal to REF terminal with wire.
※
Please use attachment connector for each connection.
※ In the following cases, the output is shut down.
When CNT and TOG is opened.
When PV and REF is opened.
Basic Connection (Local sensing)
・3-7V model
① CS terminal to + terminal of output and -S
terminal to - terminal of output with sensing wires.
② Connect CNT terminal to TOG terminal with wire.
③ Connect PV terminal to REF terminal with wire.
※
Please use attachment connector for each connection.
※ In the following cases, the output is shut down.
When CNT and TOG is opened.
When PV and REF is opened.
FG L3 L2 L1
Load
＋ −
M8 Bolts and nuts for connecting
to the load line.
(These are not attached to the
product.)
Connector : (JST) S12B-PHDSS
Attached connector when shipping
･Housing : (JST) PHDR-12VS
･Contact : (JST) SPHD-001T-P0.5
1−2, 3−4, 7−8, 9−10 are shorted.
Conn
Remo
custo
･Hou
･Con
2−
7−8
* Ple
NAME PLATE
1 3 5 7 9 11
2 4 6 8 10 12
Twist wire
Red Black Brown Yellow
Attached connector when shipping
FG L3 L2 L1
Load
＋ ー
ting
e
M8 Bolts and nuts for connecting
to the load line.
(These are not attached to the
product.)
Connector : (JST) S12B-PHDSS
Remove standard attached connector, and use the harness made by the
customer.
･Housing : (JST) PHDR-12VS
･Contact : (JST) SPHD-001T-P0.5
2− + of load, 4− - of load should be connected.
7−8, 9−10：should be shorted
* Please use wire for contact and crimping tool spectfied by maker.
NAME PLATE
Remote sensing required
① Connect +S terminal to + terminal of load with sensing
wire
② Connect -S terminal to - terminal of load with sensing
wires.
③ Connect CNT terminal to TOG terminal with wire.
④ Connect PV terminal to REF terminal with wire.
※ The accuracy of the output voltage will deteriorate when the
sensing terminals are opened.
※ In the following cases, the output is shut down.
When CNT and TOG is opened.
When PV and REF is opened.
1 3 5 7 9 11
2 4 6 8 10 12
− of output
＋ of output
Red Black Brown Yellow
Attached connector when shipping
HWS
1800T
P79-132.indd 115 09.10.26 10:29:38 AM