TDK-Lambada HWS?HWS, User Manual, Page: 32 / 133

ITEMS/UNITS MODEL HWS30-3/HD
HWS30-5/HD HWS30-12/HD HWS30-15/HD HWS30-24/HD HWS30-48/HD
Input
Voltage Range (*2) V AC85 - 265 or DC120 - 370
Frequency (*2) Hz 47 - 63
Efficiency (100/200VAC)(typ) (*1)
％
70/73 77/80 81/83 83/86 82/83
Current (100/200VAC)(typ) (*1) A 0.6/0.3 0.8/0.4
Inrush Current (typ) (*3) A 14A at 100VAC, 28 at 200VAC, Ta=25
°
C, Cold Start
Leakage Current (*10) mA Less than 0.5m. (0.2(Typ) at 100VAC / 0.4mA(Typ) at 230VAC)
Output
Nominal Voltage VDC 3.3 5 12 15 24 48
Maximum Current A 6 2.5 2 1.3 0.65
Maximum Power W 20 30 31.2
Maximum Line Regulation (*5) mV 20 48 60 96 192
Maximum Load Regulation (*6) mV 40 96 120 192 384
Temperature Coefficient Less than 0.02% /
℃
Maximum Ripple & Noise (0 ≤ Ta ≤ 71
℃
) (*4) mVp-p 120 150 200
Maximum Ripple & Noise (-10 ≤ Ta< 0
℃
) (*4) mVp-p 160 180 240
Hold-up Time (typ) (*9) ms 20
Voltage Adjustable Range VDC 2.97-3.96 4.0-6.0 9.6-14.4 12.0-18.0 19.2-28.8 38.4-52.8
Function
Over Current Protection (*7) A >6.3 >2.62 >2.1 >1.36 >0.68
Over Voltage Protection (*8) VDC 4.13-4.95 6.25-7.25 15.0-17.4 18.8-21.8 30.0-34.8 55.2-64.8
Remote Sensing -
Parallel Operation -
Series Operation Possible
Line DIP Designed to meet SEMI-F47 (200VAC Line only)
Environ-
ment
Operating Temperature (*11)
℃
-10 to +71 (-10 to +50:100%,+60:60%,+71:20%)
Guarantee Start up at -40 to -10
Storage Temperature
℃
-40 to +85
Operating Humidity
％
RH 30 to 90 (No dewdrop)
Storage Humidity
％
RH 10 to 95 (No dewdrop)
Vibration (*12)
At no operating, 10 - 55Hz (Sweep for 1min) 19.6m/s² Constant, X,Y,Z 1hour each.
Designed to meet MIL-STD-810F 514.5 Category 4, 10
Shock (In package)
Less than 196.1m/s²
Designed to meet MIL-STD-810F 516.5 Procedure I, VI
Cooling Convection Cooling
Isolation
Withstand Voltage Input - FG : 2kVAC (20mA), Input - Output : 3kVAC (20mA) Output - FG : 500VAC (100mA) for 1min
Isolation Resistance More than 100M
Ω
at 25
°
C and 70%RH Output - FG : 500VDC
Stan-
dards
Safety Standards (*13)
Approved by UL60950-1, CSA60950-1, EN60950-1, EN50178
Designed to meet UL508, DENAN
PFHC Designed to meet IEC61000-3-2
EMI Designed to meet EN55011/EN55022-B, FCC-B, VCCI-B
Immunity
Designed to meet IEC61000-4-2(Level 2,3), -3(Level 3), -4(Level 3),
-5(Level 3,4), -6(Level 3), -8(Level 4), -11
Mechan-
ical
Weight (typ) g 220g
Size (W
×
H
×
D) mm 26.5 x 82 x 95 ( Refer to Outline Drawing )
(*1) At 100/200VAC, Ta=25°C and maximum output power.
(*2) For cases where conformance to various safety specs (UL, CSA, EN) are required, to be described as 100 - 240VAC(50/60Hz).
(*3) Not applicable for the in-rush current to Noise Filter for less than 0.2ms.
(*4) Measure with JEITA RC-9131A probe, Bandwidth of scope :100MHz.
For start up at low ambient temperature and low input voltage, output ripple noise might not meet specification.
However, there is no overshoot at start up and output ripple noise specification can be met after one second.
(*5) 85 - 265VAC , constant load.
(*6) No load-Full load, constant input voltage.
(*7) Foldback current limit with automatic recovery. Not operate at over load or dead short condition
for more than 30seconds.
(*8) OVP circuit will shutdown output, manual reset (Re power on).
(*9) At 100/200VAC , Ta=25°C, nominal output voltage and maximum output current.
(*10) Measured by the each measuring method of UL,CSA,EN and DENAN(at 60Hz).
(*11) Ratings - Derating at standard mounting.
- Load (%) is percent of maximum output power or maximum output current, whichever is greater.
- As for other mountings, refer to derating curve.
- For conditions of start up at -40
°
C to -30
°
C, refer to derating curve.
- For conditions of start up at -30
°
C to -10
°
C, refer to derating curve.
(*12) Category 4 exposure levels : Track transportation over U.S. highways, Composite two-wheeled trailer.
(*13) As for DENAN, designed to meet at 100VAC.
Please refer to "TDK-Lambda
EMC Filters" catalog.
●Recommended EMC Filter
RSEL-2001W
HWS30/HD Specifications
(Read instruction manual carefully, before using the power supply unit.)
HWS
30/HD
32
・All specifications are subject to change without notice.
Instruction Manual
HWS
HWS HD
HWS ME
HWS-P