Websaw Overview
Feed rollers
Infeed and outfeed rollers are used to move wood through the Websaw.
It is important they have firm tension on the wood and if needed tension pressure can be adjusted.
Proximity photo sensor (M120)
The proximity photo sensor (or eye) is used to detect a board entering the Websaw. Once it detects
the board the proximity sensor triggers the Websaw software to start “autocycle”. The photo sensor
sensitivity is fully adjustable with a small screwdriver.
Vertical limit sensors (Up M54 down M53)
The saw carriage has two proximity sensors for determining the location of the saw head.
If the saw carriage is up the top proximity sensor is tripped and the Websaw software will show this
on the front screen as “Saw Carriage Up”. Conversely if the saw carriage is down the proximity
switch will be trigged causing Websaw software to indicate “Saw Carriage Down”. The only other
position the Websaw software will read is “Saw Carriage Middle” when neither of the proximity
switches are triggered.
Outfeed
Outfeed
Infeed
Infeed
Top Prox
Top Prox
Bottom
Prox
Bottom
Prox
Page 3 Websaw Overview
Summary of Contents for WebSaw
Page 1: ...TCT WebSaw...
