Resolution:
This is a combination of the fence being to far back and the blade being towards the
motor. Adjust fence, check 90 degree, and then repeat 30-150 test (See “Websaw Calibration” page
31guide for detailed fence adjustment). Once you have repeated the 30-150 test you should clearly
see what direction the blade needs to move.
Scenario #7
Pieces 1 to 4 are the same but 5 is short and 6 is long.
Resolution:
This is a combination of the fence being to far forward and the blade is to far from
motor. Adjust fence, check 90 degree, then repeat 30-150 test (See ”Websaw Calibration” page 31
for detailed fence adjustment). Once you have repeated the 30-150 test you should clearly see what
direction the blade needs to move.
Scenario #8
Pieces 5 to 8 are the same but 1 is long and two is short.
Resolution:
This is a combination of the fence being to far forward and the blade is to close to the
motor. Adjust fence, check 90 degree, then repeat 30-150 test (See “Websaw Calibration” page 31
guide for detailed fence adjustment). Once you have repeated the 30-150 test you should clearly see
what direction the blade needs to move.
Scenario #9
Pieces 5 to 8 are the same but 1 is short and 2 is long.
Resolution:
This is a combination of the fence being to far back and the blade is to far from the
motor. Adjust fence, check 90 degree, then repeat 30-150 test (See “Websaw Calibration” page 31
for detailed fence adjustment). Once you have repeated the 30-150 test you should clearly see what
direction the blade needs to move.
6
8
1
5
7
2
3
4
Same
Short
Same
Short
Long
Same
Long
Same
6
8
1
5
7
2
3
4
Short
Same
Short
Same
Same
Long
Same
Long
6
8
1
5
7
2
3
4
Long
Same
Long
Same
Same
Short
Same
Short
Page 36
Websaw 30-150 Testing Guide
Summary of Contents for WebSaw
Page 1: ...TCT WebSaw...
