1-1/4”
1-1/4”
Pneumatics
Keep oil reservoir supplied with approved pneumatic oil. Adjust pneumatic oil flow to last
between 2-3 weeks.
Roller Conveyor
Maintain 1-1/4 inch parallel adjustment between the feed rollers and the conveyor. This is an
average figure and may need to differ depending on your wood thickness. Adjust as necessary to
maintain positive traction at all times on lumber. Typically maintain slightly more traction on the
infeed side then the outfeed side.
Saw Motor
Grease approximately every 500 hours being carful not to over grease. The saw blade nut is right
hand thread. Make sure and only used approved wrench when tightening and apply a light amount of
oil to threads before tightening.
Oil Flow
Control
Oil Flow
Control
Grease Nipples
Grease Nipples
Oil
Oil
Adjust as
necessary
Adjust as
necessary
Page 9 Maintenance
Summary of Contents for WebSaw
Page 1: ...TCT WebSaw...
