TCM FB-8 Series, Service Manual

Page: 235 / 259

- 73 -
4. PARAMETER SETTING
4. PARAMETER SETTING
4.1 SETTING THE PARAMETERS
Take the following considerations into account when changing the parameters.
1. Be careful when increasing the acceleration level or load-handling speed levels, because that may
reduce the number of hours you can operate the truck, the motor may overheat, or other problems
may occur.
2. Remember that increasing the levels of any parameter settings may adversely affect the operation
of the truck.
4.2 PARAMETER SETUP SCREEN
4.3 KEYPAD
Program version
Battery voltage
Temperature detected
(LCD panel)
The actual temperature
detected is the displayed
value minus 15.
Parameter group
Parameter item
Setting
+ BUTTON
- BUTTON
Use these buttons to increase or decrease the parameter group number
when selecting a parameter group, and to set a parameter value.
LOW-SPEED TRAVEL (TURTLE) BUTTON
If this button is pressed while the PARAMETER GROUP SETUP screen
is displayed, the display will return to the INITIAL PARAMETER SETUP
screen.
If this button is pressed while the PARAMETER ITEM SETUP screen is
displayed, the display will return to the PARAMETER GROUP SETUP
screen.
MODE BUTTON
Use this button to toggle between parameter items.
This button is also used to display the PARAMETER SETUP COM-
PLETE screen and the DATA TRANSMISSION screen.