TCM FB-8 Series, Service Manual

Page: 125 / 259

- 99 -
⑦
Put the mark “R” on the driven gear shaft
end and remove the drive gear.
Fig. 7.24
Fig. 7.25
Fig. 7.26
Fig. 7.27
⑧
Holding the front side plate, remove the
drive gear.
⑨
Put the mark “FV” on the front side plate
at the drive gear side, and remove the side
plate.
⑩
Turn over the front cover and hold it again
in the vice. Remove the snap ring.
7. HYDRAULIC SYSTEM