TCM FB-8 Series, Service Manual

Page: 176 / 259

- 14 -
2. ELECTRICAL PARTS AND PROCEDURES FOR CHECKING
■
Removing the inverter unit (1-ton class trucks excluding those with an Orbitrol steering
system)
■
Removing the inverter unit (2- and 3-ton class trucks excluding those with an Orbitrol
steering system)
Pass screws (M4 x 20 mm or longer) through
tapped through-holes in the aluminum inverter
base and remove the inverter unit from its
aluminum fin.
Thru holes
Top view
Do not hold the inverter unit by the
cover’s grooves.
Do not hold the connectors.
Top view
Pass screws (M4 x 20 mm or longer) through
tapped through-holes in the aluminum inverter
base and remove the inverter unit from its
aluminum fin.
Top view
Thru holes
Do not hold the inverter unit by the
cover’s grooves.
Do not hold the connectors.
Thru holes