Taylor-Dunn C0-425-36, Operation, Troubleshooting And Replacement Parts Manualooting And Replacement Parts Manual

Page: 58 / 246

Maintenance, Service, and Repair
Steering Page 4
19. Adjust the left side tie rod so that the distance at the front and rear of the tires is the same.
20. Position the ball joint clamps as shown and tighten
to 28-32 ft lbs.
T
A Y
L OR - DU N
N
T
h
e
B
e
st
W
ay
To
Go About
Yo
ur
B
u
si
n
e
s
s
R
Clamps positioned so that they contact other components may result
in steering failure and loss of control of the vehicle causing severe
bodily injury and/or property damage.
21. Reconnect the main battery connector.
22. Untie the stering wheel.
23.Rotate the steering wheel from a full left turn to a full right turn and make sure that the ball joint
clamps do not contact any other component.
24. Remove the blocks from behind the wheels.
24. Release the parking brake and test drive the vehicle.
LEFT
FORWARD
RIGHT
Clamp