Taylor-Dunn C0-425-36, Operation, Troubleshooting And Replacement Parts Manualooting And Replacement Parts Manual

Page: 244 / 246

section description
section description Page 2
BRAKE LINING HANDLING PRECAUTIONS
Taylor-Dunn does not currently supply asbestos fiber-brake pads/shoes with
any vehicle. However, there is the possibility that the original brake pads/shoes
were replaced with aftermarket pads/shoes containing asbestos. Since this
possibility does exist, the brake pads/shoes should be handled as if they do
contain asbestos.
Never use compressed air or dry brush to clean the brake assemblies. Use an
OSHA approved vacuum cleaner or any alternate method approved by OSHA
to minimize the hazard caused by airborne asbestos fibers and brake dust.
Do not grind, sand, break, or chisel the brake pads/shoes, as this will cause
unnecessary dust, possibly releasing asbestos fibers in the air.
Always wear protective clothing and a respirator when working on the brake
pads/shoes or their associated components.
Inhaled asbestos fibers have been found to cause cancer and respiratory
diseases.
Do not drive the vehicle if any worn or broken part is detected in any part of
the brake system. The cause of the damage must be repaired immediately.