Taylor-Dunn C0-425-36, Operation, Troubleshooting And Replacement Parts Manualooting And Replacement Parts Manual

Page: 140 / 246

Maintenance, Service, and Repair
Tires and Wheels Page 4
1
2
3
4
5 3
4
2
1
4-Bolt Pattern 5-Bolt Pattern
Pattern for tightening the wheel nuts
Do not attempt to repair a tire with a damaged side wall or a slice in
the tread. This type of repair could fail prematurely resulting in severe
bodily injury and/or property damage.
Re-torque all wheel nuts to their final value after 1-week (20-hours)
of operation. Failure to re-torque the wheel nuts may result in the
wheel coming off of the vehicle causing severe bodily injury and/or
property damage.
REPAIR THE TIRE (PNEUMATIC)
NOTE: To properly repair a puncture, the tire must be removed from the
wheel. Refer to Replace the Tire section for information on
removing the tire from the wheel.
It is recommended to repair a tire with a combination vulcanized plug and internal patch.
Tire repairs should only be performed by personnel trained in tire repair.
The tire repair procedure will be unique to the type of repair equipment or repair components used.
Refer to the instructions provided with your equipment or repair components.