29
GNCRP / GNCRPE / GNCRPE 230 - Rev. 03 - Aug/22
5. Assembly
First of all, put the parts in a clean place to identify them easier. Check the parts using
the list that comes inside the packing box.
Using the set of wrenches
- Use two box end wrenches (A) to tighten the nuts of the disc gang, being one to hold
the axle nut on one side while the other tighten the nut to the other end, thereby preventing
the axle from rotating.
- The box end wrench (B) is used to tighten the nuts on the traction set.
- The box end wrench (C) is used to tighten the nuts of the bearing bolts.
- The L-type socket wrench (D) is used to tighten the nuts that fasten the frame.
- Only
QUALIFIED
and
AUTHORIZED
personnel must assemble/disassemble the
equipment.
- Use safety glasses, earplugs/muffs, protective gloves and any other required PPE.
- Avoid direct contact with the lubrication oil and do not throw it or any other type of
oil or grease away on the environment.
ATTENTION!
- We recommend wearing gloves, especially while assembling the disc gangs.
ATTENTION!
C
C
D
D
A
A
A
A
B
B
B
B
A
A
