60
GNCRP / GNCRPE / GNCRPE 230 - Rev. 03 - Aug/22
Adjusting the wheel support bearings
The disk harrow has an adjustment on the wheel support
bearings by its slots (F). This adjustment can be used to center
the wheel support with the equipment structure and to eliminate
lateral clearances between the articulation axles and the bearings.
Adjust the bearings by centering the wheel support with the
frame. Note that the tires must have the same distance related
to the frame. The wheel support axle (B) must have no clearance
on the bearing.
5. Assembly
F
F
- GNCRP: 32 and 36 disc blades / GNCRP: 64 to 72 disc blades
- GNCRPE: 36 to 60 disc blades
- GNCRPE 230: 28 to 72 disc blades
GNCRPE 230: 28 to 72 disc blades
1. Assemble the bearing (C) to the bearing complement (A) using bolts (E), washers,
nuts and counternuts.
GNCRPE - 36 to
GNCRPE - 36 to
60 disc blades
60 disc blades
GNCRP - 64 to 72 disc blades
GNCRP - 64 to 72 disc blades
GNCRPE 230 - 28 to 72 disc
GNCRPE 230 - 28 to 72 disc
blades
blades
GNCRP - 32 and
GNCRP - 32 and
36 disc blades
36 disc blades
C
C
C
C
C
C
B
B
B
B
B
B
E
E
E
E
E
E
Wheel support bearings assembly
B
B