72
GNCRP / GNCRPE / GNCRPE 230 - Rev. 03 - Aug/22
3. Use the jack (C) on the drawbar to lift or lower the hitch to align it with the tractor
drawbar.
4. Couple the hitch (A) on the tractor drawbar and lock using an axle (B) and cotter
pin.
- GNCRP: 64 to 72 disc blades
1. Check the drawbar type from your tractor. To hitch the equipment, use the tractor
drawbar.
2. Use the jack (D) on the drawbar to lift or lower the hitch to align it with the tractor
drawbar.
3. Hitch the drawbar (E) to the tractor drawbar using a pin (F). Use the bushing (G)
on the hitch and a pin (F) that matches with it. Note that the tractor drawbar is
centered on the tractor.
4. Fasten the safety chain (H) to the tractor and equipment, but leave a small clearance
to allow the equipment to perform maneuvers.
- GNCRPE 230: 28 and 72 disc blades
6. Set-up instructions
Hitching to the tractor
- The pin (C) and cotter pin are not included with the equipment.
- Keep the tractor drawbar locked when transporting the equipment.
NOTE
A
A
B
B
C
C
