78
GNCRP / GNCRPE / GNCRPE 230 - Rev. 03 - Aug/22
7. Adjustments and operations
B
B
A
A
B
B
A
A
Leveling the equipment
- GNCRP: 64 to 72 disc blades
- GNCRPE 230: 28 to 72 disc blades
The stabilizer bar (C) is
adjusted according to the tractor
drawbar height.
It is important to let the disk
harrow parallel to the soil when
the wheel support is activated.
As a starting point, change
the stabilizer bar (C) fixation
to the hole (E) to let it as short
as possible. Then, change the
points as necessary.
C
C
E
E
IMPORTANT
- When adjusting the lateral displacement, it is also necessary to change the fixation
of the stabilizer bars (A) to keep the equipment leveled. In order to do so, use the
holes (B) and let the disc gangs leveled with the soil.
- Keep the tires totally lowered when in transport position.
Tractor position related to the previous pass - lateral displacement
Only for GNCRP: 32 to 60 disc blades
GNCRPE: 36 to 60 disc blades
