Tatu Marchesan GNCRP, Operator'S Manual

Page: 67 / 104

65
GNCRP / GNCRPE / GNCRPE 230 - Rev. 03 - Aug/22
Hydraulic circuit
5. Assembly
- Always use thread sealing tape to couple the male quick coupler to the hoses.
- The cylinder rod must always be facing the front part of the equipment.
- During assembly, avoid that the ports touch the soil.
- When finishing to assemble the hydraulic hoses, carry out a general inspection to
check if all hose ports are tightened and if they are properly installed.
IMPORTANT
ATTENTION! RISK OF ACCIDENT
- Do not make any repair when the system is pressurized or if the cylinder is under
load.
- Use proper hand and eye protection to search for high-pressure hydraulic leaks.
- GNCRP: 32 to 60 disc blades
- GNCRPE: 36 to 60 disc blades
GNCRP 32 - 36 disc blades GNCRP 32 - 36 disc blades
Item Item Quantity Quantity Description Description
01 01 3/8" X 6200 TM - TM hose Return Return
02 01 3/8" X 6200 TM - TM hose
Pressure Pressure
03 01 Hydraulic cylinder
04 02 Male quick coupler 1/2 NPT with cap
GNCRP 40 - 60 disc blades / GNCRPE 36 - 60 disc blades GNCRP 40 - 60 disc blades / GNCRPE 36 - 60 disc blades
Item Item Quantity Quantity Description Description
01 01 3/8" X 7100 TM - TM hose Retorno Retorno
02 01 3/8" X 7100 TM - TM hose Pressão Pressão
03 01 Hydraulic cylinder
04 02 Male quick coupler 1/2 NPT with cap
03 03
01 01
02 02
04 04
"Red" "Red"
Pressure Pressure
"Blue" "Blue"
Return Return
"Black" "Black"
Lifting Lifting
cylinder cylinder